Frequently Asked Questions
Everything you need to know about internet stability testing and how to improve your connection.
General
Internet stability refers to how consistent your connection is over time. A stable connection maintains steady latency (response time) and minimal packet loss. Unlike speed, which measures raw bandwidth, stability measures reliability. You can have fast internet that is unstable—leading to lag spikes in games, choppy video calls, and buffering during streams.
Speed tests measure throughput: how much data you can download or upload per second. The stability test measures consistency instead: latency, how much it varies (jitter), requests that are lost and brief disconnects, all drawn on a timeline. Many everyday problems come from instability rather than speed, which is why a fast connection can still lag. There is a separate speed test on this site if you want both numbers.
If you experience lag spikes while gaming, choppy video calls, buffering during streams, or general inconsistent performance, the problem is usually stability—not speed. Testing helps identify whether your connection has issues with latency, jitter, packet loss, or DNS that affect real-world performance.
You choose: 30 seconds for a quick check, 2 minutes for a standard test, 5 minutes to catch problems that come and go, or a continuous monitor that runs until you stop it. Short tests suit quick checks; longer tests are better at finding intermittent drops.
Yes. IsMyInternetStable is free to use, with no account, subscription or premium tier. The site is supported by advertising.
Understanding Your Results
Latency (also called ping) is the time it takes for data to travel from your device to a server and back, measured in milliseconds (ms). Lower latency means faster response times. For gaming, under 50ms is excellent; for video calls, under 100ms works well. High latency causes noticeable delays in real-time applications.
Jitter is the variation in latency over time. Even if your average latency is low, high jitter means your connection is inconsistent—sometimes fast, sometimes slow. This causes choppy video calls, lag spikes in gaming, and buffering during streams. Ideal jitter is under 30ms; under 10ms is excellent.
Packet loss is data that never arrives at its destination. Even 1% can cause missing audio in calls, rubber-banding in games and video artifacts. A browser cannot see individual network packets, so this test reports request loss instead: the share of its small HTTPS requests that failed or timed out. Request loss is a good sign of real trouble, but it is not the same number a network-level tool would report.
Micro-disconnects are brief interruptions in your connection lasting from milliseconds to a few seconds. They may go unnoticed during casual browsing but cause significant issues in gaming (disconnects), video calls (frozen screens), and live streams. Zero micro-disconnects during a test indicates excellent stability.
DNS (Domain Name System) translates website names into IP addresses. Slow or failing lookups delay the first connection to a site. Browsers do not expose DNS timing, so the test only makes a rough background estimate of connection-setup time and labels it as an estimate. It counts for a small part of the score, and when no estimate is available it does not affect the score at all.
The score starts at 100 and loses points for each problem, weighted by how much it affects real use: jitter 35%, request loss 25%, micro-disconnects 20%, latency 10% and the DNS estimate 10%. 85 to 100 is excellent, 70 to 84 good, 50 to 69 fair and below 50 poor. This is our own methodology, not an industry standard.
Gaming
For gaming, low latency (under 50ms), low jitter (under 15ms), and zero packet loss are critical. Jitter causes lag spikes where your character suddenly teleports or stutters. Packet loss causes rubber-banding where you snap back to previous positions. Micro-disconnects can kick you from matches entirely.
Gaming lag is usually caused by high latency, jitter, or packet loss—not bandwidth. A 1 Gbps connection with 100ms latency and 5% jitter will feel laggier than a 50 Mbps connection with 20ms latency and 2ms jitter. Our test specifically measures these gaming-critical metrics.
Use a wired Ethernet connection instead of WiFi if possible. Close background applications that use bandwidth. If on WiFi, move closer to your router or use a 5GHz band. Consider Quality of Service (QoS) settings to prioritize gaming traffic. Our test results include specific recommendations for your situation.
Video Calls
Choppy video is usually caused by jitter (latency variation) or packet loss. When packets arrive at inconsistent times, video frames display out of order or get dropped. Audio can cut in and out when voice packets are lost. Stable latency under 150ms with minimal jitter ensures smooth calls.
Video requires more bandwidth and is more sensitive to packet loss than audio. When your connection degrades briefly, video codecs may drop frames while audio continues. This indicates intermittent instability—check for micro-disconnects and jitter in your test results.
Reduce jitter by using a wired connection. Close other applications and browser tabs during calls. If others share your network, schedule calls during lower-usage times. Ensure your router firmware is updated. Position yourself closer to your WiFi router if wired isn't an option.
Streaming
Buffering often occurs due to connection instability rather than insufficient speed. Micro-disconnects interrupt the data flow, and the player must buffer to compensate. High jitter can also cause the stream to pause while waiting for delayed packets. Test your stability to identify the specific cause.
4K streaming needs steady delivery of roughly 25 Mbps, not just a high peak speed. Streaming is the most forgiving use because players buffer ahead, so occasional jitter rarely matters. Frequent disconnects or heavy request loss during a test are the signs that 4K playback is likely to stall or drop in quality.
Adaptive bitrate streaming adjusts quality based on detected connection performance. If your connection is unstable (high jitter, packet loss), the player reduces quality to prevent buffering. A stable connection maintains consistent high quality throughout.
Work from Home
Remote work mostly depends on video calls, VPN responsiveness and steady access to cloud apps. Low jitter and no disconnects matter most for meetings; latency affects how responsive a VPN or remote desktop feels. A score in the good or excellent range usually means the connection is not what is holding your work back.
VPN performance is heavily affected by latency since every action must travel through the VPN server. High jitter makes VPN connections feel inconsistent. If your test shows elevated latency or jitter, these are likely causing your VPN issues rather than bandwidth limitations.
Use a wired connection for your work computer if possible. Set up QoS on your router to prioritize work devices. Schedule large downloads/uploads outside work hours. Consider a mesh WiFi system if you work far from your router. Test your connection during typical work hours to identify patterns.
Troubleshooting
Common causes include: WiFi interference from other networks or devices, network congestion during peak hours, outdated router firmware, too many devices on your network, ISP issues, or faulty cables/equipment. Our test helps identify which metrics are problematic so you can target your troubleshooting.
WiFi 6 (802.11ax) offers improved stability features like OFDMA and better handling of multiple devices. However, the biggest stability improvement usually comes from using a wired Ethernet connection. WiFi 6 helps most in congested environments with many devices.
If your test consistently shows issues (especially packet loss or high latency) and you've ruled out home network problems, contact your ISP. Share your test results—specific metrics are more compelling than "my internet feels slow." Persistent issues may indicate problems with the connection to your home.
Yes, VPNs add latency and can introduce jitter depending on server quality and distance. For accurate baseline results, test without a VPN first. Then test with VPN to understand its impact on your connection. Some VPNs may also affect packet loss measurements.
Technical Details
The test runs entirely in your browser. It sends a small HTTPS request to a public DNS server (Quad9 by default, and you can pick another while it runs) every 500 milliseconds and times each response. From those timings it works out latency, jitter, requests that were lost, spikes and disconnects. It also checks the other DNS providers less often, to tell a problem with one route from a problem with your connection. Because these are web requests rather than ICMP pings, the numbers read a few milliseconds higher than a command-line ping.
Nothing about your test is sent to our servers. Your results and history are stored only in your own browser, and you can delete them at any time. The test itself contacts public DNS servers (OpenDNS, Quad9, Cloudflare, Google and AdGuard) to take its measurements. See the Privacy Policy for full details.
Internet conditions naturally fluctuate based on network congestion, time of day, and background activity on your network. Minor variations are normal. If results vary significantly (e.g., score swings of 20+ points), this itself indicates instability. Test at different times to understand your typical performance.
Not at the moment. The test measures your connection to a public DNS server you can choose (Quad9 by default), with the other providers as a cross-check. That gives a dependable picture of your own connection, but not of the route to one particular game server. For that, use the game's own latency display alongside this test.
Ready to Test Your Connection?
Get detailed insights about your internet stability in just 30 seconds.
Still have questions? Contact us and we'll be happy to help.